El trueque es el presente y el futuro del comercio internacional, especialmente para las personas que se inician en el negocio de importación y exportación. El trueque y más, operaciones triangulares.
La segmentación perfecta para sus propuestas de negocio, Sus lugares de destino, además de su clase de clientes objetivo, además de sus artículos y categorías.
22PI04 crushing shaft set can be used in PCM110 hammer crusher. In the process of coal transportation, the crushing shaft drives the crushing hammer head to rotate at high speed, impact and cut large pieces of coal, so that large pieces of coal can be rolled and broken into the required lumpness.
Double small series warm tips pay attention to installation
1. Open the cover plate on the belt protection cover and belt pulley protection cover during test operation to detect the tensioning degree of narrow V-belt and the running condition of belt pulley;
2. Clean the contact surface between the hammer head and the hammer body, tighten the hammer head fastening bolts and washers according to the required direction to make the bolts relax reliably;
3. Each piece of the lubrication system is related to each other and shall be filled with lithium base grease before assembly
Caution before test run
1. There should be no looseness of the connecting parts;
2. Disk-driven crushing shaft group, rotation should be flexible and free of jamming phenomenon;
3. Check the motor wiring to ensure that the running direction of the broken shaft set is consistent with the running direction of the scraper chain of the transfer machine.
The crushing shaft is composed of a shaft and a hammer body, in which the hammer body is cast as a whole and the hammer body is forged, and the two are connected with a special anti-elastic and solid component. More fully mechanized coal mining accessories, welcome to consult Henan Shuangzhi.
